We now expand our energy meter range with an entirely new series of ultrasonic meters.
Ultrasonic technology offers the advantage of no moving parts, giving our meters an increased life span and more a accurate degree of measurement.

The first step towards an efficient use of energy always lies in measurement. Our meters give you complete control of a large number of parameters, such as heat and cold consumption, total energy spent on heating and cooling, temperatures along with current energy consumption. They are also compact and can be mounted horisontally or vertically, offering a great degree of flexibility.

Our ultrasonic meters are intended for heating and cooling installations and consist of three models: SS2U,
US-S/FFL and US-WV. The meters are available in sizes up to DN 100 with flows from 0.6 m3/h up to 60 m3/h and can be ordered with M-Bus, pulse output or with both M-Bus and pulse inputs.

Would you also like to take part of our entire range of energy meters? Read more here >>

The actuators are compact and easy to install in confined spaces, such as fan-coils, chilled ceiling manifolds, etc. They have a concise LED indication, showing the status and diagnostics of the actuator.

The series contains two simpler models with fixed stroke and different supply voltage, as well as a more advanced model with a built-in self-calibrating function and adjustable stroke.

This new version of the E0R repeater has been adapted for the third generation Corrigo/EXOcompact and is used in the same way as previously. Up to 6 units can be connected and the cable length between the Corrigo/EXOcompact and the external display unit can be expanded to up to 1200 m.

Usage

The E0R...-3 repeater is used to increase the distance between up to 6 Corrigo/EXOcompact and Regin’s external E3-DSP display unit. Since all controllers can be assigned a name in E0R...-3, it is easy to obtain a good overview of your installation using the repeater.

Communication

The repeater has an RS485 port and communicates via EXOline.

With or without casing

The repeater can be ordered either as a loose unit for 24 V supply voltage or pre-mounted in a casing that includes a transformer that connects to 230 V AC.

Clamp on, immersion, duct, room and outdoor sensors are now available with several new temperature elements, in addition to our popular NTC, PT100 and PT1000 sensors.

The controllers are developed according to our Ready-Steady-Go concept, making them easy and flexible to use as well as simple to install. 

Simple, easy handling

All models have a reversible output signal that permits you to select control of for instance heating or cooling, temperature with demand-controlled ventilation (CO2), humidification or dehumidification. The setpoint is easily changed using the wheel on the right side of the casing or using the potentiometer inside the casing..

Easy mounting

The AL230 controllers have a discreet, stylish design suitable for all indoor environments. They are mounted on a normal 230 V AC device box.

To the AL230 controllers

News such as a new casing, port for M-Bus, an increased number of communication ports and built-in support for BACnet simplifies installation and increases your options for communication and integration; all providing you, the end user, with even more flexibility.

The Corrigo E tool© configuration software has been updated to version 3.3. This new version is backwards compatible with all Corrigo heating controllers from version 2.1.

Regardless of whether Corrigo should be used stand-alone or in a network and no matter how many inputs/outputs and communication protocols you need, there is always a Corrigo model suiting you! Take a look in our wide range of controllers and find just the right model for your needs!

CLOUDigo supports many users with different access levels. Values can be logged and displayed graphically or exported to Excel.

We’ve developed CLOUDigo with a focus on simplicity. The user interface is intuitive and it’s easy to get started and connect your controllers. The choice is yours whether to work from a computer, tablet or phone – your changes will still always take effect immediately. It just can’t get any easier, quicker and more effective than this!

Welcome to CLOUDigo!

Whether for commissioning, testing and training purposes, E-CASE-E283DW-3-24 is very easy to use and to bring along. Just plug the controller into a 230 V wall socket and you are ready to begin simulations of analogue and digitals inputs and outputs as well as testing configurations.

The valves are available in 2- or 3-way variants as well as in bypass models, and with kvs values ranging from 0.25 up to 6.0. They are intended for use together with Regin's RTAOM line of thermal actuators.

VTTV/VTTR/VTTB replaces the ZTTV/ZTTR/ZTTB series.

Go to VTTV >, VTTR >, VTTB >.

The thermostats are available in a great variety of models to suit different kinds of installation:

Clamp-on thermostat, MTIS >
Immersion thermostat, MTIB >
Frost protection thermostat, FT >
Room thermostat, R3 >
Duct thermostat, MTID >
Capillary thermostat, MTIC >
Wall thermostat, MTIR >

Click on the links to go to the different products.

The flow switches have a protection class of IP65 and are available in brass (suitable for normal media), and stainless steel AISI 316L (suitable for seawater and aggressive media). They fit pipe sizes ranging from 1” to 8” and have an adjustable or fixed switching differential.

Applications:

• Heating and air conditioning systems
• Cooling system
• Sprinkler or anti-fire systems
• Heat pumps
• Devices for oil monitoring
• Lubrication circuits

Go to FLSX >>

The transmitters have a protection class of IP65, a high degree of accuracy, short reaction time and excellent long-term stability. They are available with a supply voltage of either 24 V AC or 15...35 V DC.

HTRT2500(-420) is intended for wall mounting and replaces HRT350(-420) and HTRT350(-420).
HTDT2500(-420) is intended for duct mounting and replaces HDT3200(-420) and HTDT3200(-420).

Go to HTRT2500(-420) >
Go to HTDT2500(-420) >

Rooms that are heated or cooled when unoccupied, or when a window is left open, are a pure waste of energy. By connecting RCF to a temperature sensor, keycard switch or a window contact, temperature and air flow are controlled automatically based on room occupancy. If a window is opened, heating and cooling are blocked. In this way, comfort and temperature are maintained at a comfortable level at the same time energy is conserved.

RCF is suitable for use in buildings where optimal comfort is desired at the same time as reduced energy consumption, such as offices, schools, shopping centres, airports, hotels and hospitals, etc. Its modular design, featuring a separate bottom plate for wiring, makes the controller easy to install and commission. The bottom plate can be put into place before the electronics are installed. Mounting takes place directly on a wall or wall socket.

RCF with communication

Models featuring communication can be connected to bus lines, such as BACnet, Modbus or EXOline in order to communicate with a central SCADA system via RS485. The models are pre-programmed, but can be configured using the Regin’s software Regio tool©. RCF models with communication are BTL approved as of software version 1.2-1-0 (BACnet stack 3.0.4).

Quick facts on RCF:
• Can be used in 2- or 4-pipe systems with electric heating or where water is used for heating/cooling
• Control of 3-position, thermal, On/Off or 0...10 V DC actuators
• 3 fan speeds
• Connection of occupancy detector, keycard switch or window contact
• Automatic or manual (M models) change-over between heating/cooling
• Automatic valve exercise
• 230 V AC supply voltage

Go to RCF >

A few of the news in Corrigo

- New housing and blue display
- Greatly improved processing power
- 5-20 times faster communication speed
- Supports communication via BACnet
- Up to 3 communication ports
- External and internal display can be used at the same time

Would you like to get to know the details?

There’s much more than the news above. The third generation Corrigo has evolved in numerous ways and in many details. Would you like to know more? Download the product sheet here.

Use our cloud service – access your controllers via the web

CLOUDigo is an extremely practical cloud service. It enables you to connect a Corrigo with integrated web server in order to view and administer all facilities. The only thing required is an Internet connection via a network cable or 3G modem.

Read more ->

Smart and versatile accessories for Corrigo

How about an external touch display, making it easier to monitor and control the ventilation system? Also available are external display units providing full external control, usable at a distance of up to 100 meters, as well as remote control units with a stylish design.

Read more ->

Download the latest version of E tool (3.3-1-23) ->

Here's the news:

News 1 - More accessible documentation.

All relevant documentation (product sheets, manuals, instructions, etc.) and software are found where they belong - with the product or article. And you can quickly choose to download all documents or just a single one. Click and test here!

News 2 - Easier search.

A completely new, intelligent search allows you to see both images and product names at once. Test here, on the top of the start page!

News 3 - Special pages for HVAC and System.

Here we release all the news about products and anything else that is relevant to the fields. Test here! 

News 4 - Easier to navigate.

To help you find what you are looking for even faster, we have rebuilt the navigation system. Now it is based on images instead of text. Test here!

News 5 - Smarter article lists.

Re-made article lists. Now you can easily choose articles through a quick look at the most important and distinguishing information. Test here!

News 6 - Easier to select accessories.

Now it is easy to see which accessories match a product or article. Test here.

Have an opinion?

For us, our homepage is an on-going process. If you have thoughts, comments, likes or dislikes - do not hesitate to send an email with your thoughts. That's how we can develop and make the website even more useful to you.

But right now we just want to enjoy a new, improved website. Hope you enjoy it too. And thanks again for all the help.

Best regards

All of Regin

RVA is Ready-Steady-Go

When developing the RVA range, focus has been on Regin's Ready-Steady-Go concept, which means that Regin's products should be extremely easy to use. The coupling between actuator and valve is so simple that the user can make the connection without any tools. Simply press on a spring-loaded plate to connect to the valve. There is also a convenient way to adjust the RVA actuators thanks to Regin's patented solution; an adjustment button which when pressed allows the stem to be manually adjusted. The aesthetic and stylish design of the RVA range also makes it possible to achieve a nice-looking installation.

Allows connection to other valve brands 

In some cases, you want to be able to combine actuators with valves of other brands. For that reason, we offer an extensive assortment of adapters for the RVA range, making it possible to easily replace actuators in existing installations with the RVA actuators.

Actuators and drip-tight valves – an optimal combination

The combination of drip-tight valves and the correct valve dimensions is a winning solution for the customer as well as the environment. Therefore, we have combined the advantages of the RVA range with a complete range of specially-adapted bubble-tight valves with 0 % leakage – everything to save energy and costs, and spare the environment at the same time.

Regio Midi – pre-programmed controllers with communication 

Regio Midi are room controllers that can be integrated with a central SCADA system via a bus line using Modbus, EXOline or BACnet communication. The controllers are pre-programmed and can be configured using our software Regio tool©. 

13 new features in Regio Midi 1.4

1. Control of EC-fans (0...10 V)
2. Alarm at too high/low temperature 
3. BACnet communication (applies to models with display) 
• BACnet as a standard
• BACnet/MSTP
• Baudrate increased to 76 800 bps for BACnet
4. New models with three universal outputs (on/off or 0...10 V)
5. Selectable on/off, on/off (pwm) or 0...10 V for each output
6. Possible to change order of Y2 and Y3, e.g. air/water or water/air
7. On/off or 0...10 V in forced ventilation
8. Minimum damper output limit
9. New change-over function
10. CO₂ control in additional control modes
11. Electric heating function 
12. Flow input with flow calculation
13. Minimum heating output limit

Regio tool©

This is the intelligent software for Regio Midi. With a PC and Regio tool©, you can easily configure and adjust the default settings for the Midi controllers. All settings can be made at the office and downloaded to the controllers on site. In the same way, it is possible to copy settings from one controller and download them into another. Regio tool© also offers a clear overview of settings and status for service and error detection purposes.